BRAND NEW R&G RACING TAIL TIDY

FOR THE YAMAHA YZF R1 2007 TO 2010 MODELS

THIS IS A BRAND NEW PRODUCT  FROM R&G RACING

IT IS OF THE BEST QUALITY AND DESIGN  WITH FULL EASY TO FOLLOW INSTRUCTIONS.

THERE IS NO CUTTING OR DRILLING OF YOU ORIGINAL REAR FENDER, ITS SIMPLY UN BOLTED AND REPLACED WITH THE R&G TAIL TIDY.

 NEW MICRO LED NUMBER PLATE LIGHT

YOU CAN RETAIN YOUR ORIGINAL INDICATORS OR REPLACE THEM WITH MICRO ONES AS PREFERED BY YOURSELF.

 GIVING THE BIKE A MUCH SMOOTHER  LOOK AS SHOWN IN THE PHOTOS.

INSTRUCTIONS FOR R&G LICENCE PLATE HANGER

 

 

 

Yamaha R1

part code LP0040BK)

 

Remove rear seat.

Undo the four bolts that hold licence plate to the bike, these are undone from inside the tail unit, as the nuts are captive.

Lower OEM licence plate holder and undo wire connections. Carefully pull the wires out from the under tray.

Fit indicators of your choice to the R&G unit. If using OEM use the two plastic spacers to make them a tight fit. If using after market use the four-infill plates.

Pass the wires back through the bike.

Offer R&G Tail Tidy up to bike and fit using the four OEM bolts with the four nyloc nuts and washers supplied. The bolts may fitted the other way round with the nuts inside the tail unit if preferred

Reconnect the wires to the bike.

Refit the seat

EUROPEAN DELIVERY £12.99

FAST  DELIVERY 1 TO 2 WORKING DAYS

UK DELIVERY ONLY £1.99

£60.00